Valves and Unions
Valves and Unions
are quarter-turn, straight through flow valves that have a round closure element with matching rounded seats that permit uniform sealing stress.
Ball valves are used in situations where tight shut-off is required. The type of seat can vary with the valve pressure rating and materials of construction.
This may be used as a...
allow you to tightly close off the water lines of the connected piping to allow for maintenance on joined mechanisms such as pumps or filters without shutting down your pond.
Gate valves (also known as knife valves or slide valves) are linear motion valves in which a flat closure element slides into the flow stream to provide...
UNION, 1-1/2” MPT X 1-1/2” SOC.UNION, 1-1/2” FPT X 1-1/2” SOC.UNION, 1-1/2” MPT X 2” SOC.UNION, 2” MPT X 2” SOC
Swing Check Valves
are mechanical valves that permit water to flow in only one direction, preventing process flow from reversing. They are classified as one-way directional valves. Fluid flow in the desired direction opens the valve, while backflow forces the valve closed.
These install near your skimmer or filter, so if the pump is turned...
In general, True Union Swing Check Valves
offer many advantages when contrasted with other valve types. They provide superior ease of operation and can maintain and regulate high volume, high pressure and high temperature flow.
Most true union swing check valves offer rugged construction providing for a long service life, and a comparably low...
These 3-Way Valves
can be used in your plumbing wherever you may require to divert the flow of water. This is mainly used in the case of maintenance of your filtration or pump equipment.
The diverter valve seal is Teflon laminated silicon. A unique manufacturing process is used call TruSeal - which result in a seal that never need...
© 2016 Canadian Ponds Online all rights reserved.